(1)For driver (in steering wheel pad)
Construction
The driver’s seat SRS airbag assembly is stored in the steering wheel pad. SRS airbag assembly cannot be disassembled. It consists of the inflator, Read more SRS Airbag Construction and Operation – Inflator and bag
Monthly Archives: July 2011
E-Type SRS Airbag Components
Location of Components
The SRS airbag system consists of the following components.
1.Front airbag sensor (LH, RH)
2.Center airbag sensor assembly
(airbag sensor assembly)
3.Driver airbag assembly
4.Front Read more E-Type SRS Airbag Components
Caution to consider about SRS Airbag
1.Child restraint
Never install a rear-facing child restraint system on the front passenger seat because the force of the rapid inflation of the front passenger airbag can cause death or serious injury Read more Caution to consider about SRS Airbag
Operations of SRS Airbag
(1)In a collision, the airbag sensor detects the degree of the impact and when the degree exceeds the specified value of the center airbag sensor assembly (airbag sensor assembly), the initiator in the Read more Operations of SRS Airbag
Need for seat belts and SRS airbags
When a vehicle collides with another vehicle or a stationary object, it stops very quickly – but not immediately. For example, if a vehicle hits a fixed barrier in a 50 km/h (30 mph) frontal crash, it Read more Need for seat belts and SRS airbags
SRS Airbag Construction and Operation – Occupant detection sensor
The occupant detection sensor, which is enclosed in the seat cushion of the front passenger seat, is used to detect whether or not the front passenger seat is occupied.
The sensor shown in the illustration Read more SRS Airbag Construction and Operation – Occupant detection sensor
What Are SRS Airbag?
1.Vehicle safety
Vehicles have two kinds of safety requirements. The first is active safety, which involves preventing accidents before they occur, and the other is passive safety, which involves protecting Read more What Are SRS Airbag?