Archive for the ‘Automotive System’ Category

SRS Airbag System Operation

Friday, September 9th, 2011 | 1.Ignition judgement and conditions (1)Front collision When both the deceleration sensor and safing sensor in the center airbag sensor assembly turn on, the driver airbag, front passenger airbag and seat belt pretensioners ...

SRS Airbag Construction and Operation – Connectors

Thursday, September 8th, 2011 | All connectors in the SRS airbag are colored yellow to distinguish them from other connectors. Connectors having special functions and specifically designed for the SRS airbag are used in the locations ...

SRS Airbag Construction and Operation – Spiral cable

Wednesday, September 7th, 2011 | A spiral cable is used as an electrical joint from the vehicle body side to the steering wheel. The spiral cable is made up of the rotator, case, cable, cancel cam, ...

SRS Airbag Construction and Operation – SRS warning light

Tuesday, September 6th, 2011 | The SRS warning light is located on the combination meter. When the center airbag sensor assembly detects any malfunction of the airbag system, it turns on the SRS warning light and ...

SRS Airbag Construction and Operation – Seat position airbag sensor

Sunday, September 4th, 2011 | The seat position airbag sensor is used because of the adoption of the dual-stage inflator in the driver's airbag. The seat position airbag sensor is installed on the seat rail ...

SRS Airbag Construction and Operation – Side door sensor

Thursday, September 1st, 2011 | The side door sensors are only set in the two-door or three-door hatchback vehicle with the side airbag, and are installed inside the front doors. The side door sensor detects ...

SRS Airbag Construction and Operation – Inflator and bag

Sunday, July 10th, 2011 | (1)For driver (in steering wheel pad) Construction The driver's seat SRS airbag assembly is stored in the steering wheel pad. SRS airbag assembly cannot be disassembled. It consists of the inflator, bag ...

E-Type SRS Airbag Components

Saturday, July 9th, 2011 | Location of Components The SRS airbag system consists of the following components. 1.Front airbag sensor (LH, RH) 2.Center airbag sensor assembly (airbag sensor assembly) 3.Driver airbag assembly 4.Front passenger airbag assembly 5.Spiral cable 6.Side airbag assembly (LH, RH) 7.Curtain ...

Caution to consider about SRS Airbag

Friday, July 8th, 2011 | 1.Child restraint Never install a rear-facing child restraint system on the front passenger seat because the force of the rapid inflation of the front passenger airbag can cause death or serious ...
Pages: Prev 1 2 3 4 5 6 7 8 9 10 ...14 15 16 Next

Search an Article

Find entries :