1. Construction
The disc brake consists of the following components.
(1) Disc brake caliper
(2) Disc brake pad
(3) Disc brake rotor
(4) Piston
(5) Fluid
2. Operation
The disc brake Read more Foot Brake Disc Brake
brake
When inspecting the brake actuator operation,
it is difficult to perform the test while actually driving, so the following method is used to generate simulated signals to simulate and inspect the ABS operation condition.
(1) When using the SST
Connect Read more When inspecting the brake actuator operation,
TheTRC and VSC Brake Actuator 1 of 2
1. TRC operation (for pressure increasing mode)
When the accelerator is depressed, the hydraulic pressure for each wheel cylinder is controlled to control the drive wheel slip. At this time, in models Read more TheTRC and VSC Brake Actuator 1 of 2
TRC (TRaction Control system) Overview
Sometimes when the accelerator is depressed too much while starting off or accelerating on slippery surfaces, etc., the excessive torque that is generated causes the drive wheels to slip, causing the vehicle Read more TRC (TRaction Control system) Overview
Construction of a Drum Brake
1. Construction
The drum brake consists of the following components.
(1) Wheel cylinder
(2) Brake shoe
(3) Brake lining
(4) Return spring
(5) Brake drum
(6) Piston
(7) Piston cup
Hydraulic Control Unit
The clutches and brakes that operate the planetary gear unit are operated by hydraulic pressure. The hydraulic control unit generates and adjusts this hydraulic pressure and switches its passage. The illustration Read more Hydraulic Control Unit
What is Brakes (B1, B2 and B3)?
There are two types of brakes fixing elements: the band type and the wet multiple-disc type. The band type is used for the B1 brake and the wet multiple-disc type for the B2 and B3 brakes. In some automatic Read more What is Brakes (B1, B2 and B3)?