The door lock control system that is controlled by the integration relay consists of the following parts:
1.Integration relay (door lock ECU)
The integration relay receives signals from each switch and Read more Automotive Door Lock Mechanical function (One-motion open function):
Automotive System
Automotive Door lock system
The door lock control system does not simply lock/unlock the doors by mechanical operation, but also controls the electric motor according to the operation of the door lock control switch and key.
The Read more Automotive Door lock system
New Wiper System and Functions
1.Full area wiper system
The full area wiper is equipped to keep the specified wiping area independently of the wiper speed.
In the normal wiper system, the wiping area is apt to become larger because Read more New Wiper System and Functions
Illuminated Entry System/Interior Light Reminder System
1.Illuminated entry system operation
When there is no key in the ignition key cylinder
When all of the doors are closed after any one of the doors was open
When the above conditions are satisfied, a Read more Illuminated Entry System/Interior Light Reminder System
Headlight Beam Level Control System
(1)Headlight beam level control switch
The driver can adjust the headlight beam level up and down using the dial knob. A variable resistor in the switch outputs an amount of current in proportion to the Read more Headlight Beam Level Control System
Automatic Light Control System
When the automatic light control sensor detects level of the ambient light while the light control switch is in the AUTO position (or in the OFF position for the models without the AUTO position), it transmits Read more Automatic Light Control System
Light Reminder Buzzer System / Light Auto Turn-Off System
1.Light reminder buzzer automotive system operation
Light control switch in TAIL or HEAD position
Ignition switch in ACC or LOCK position
Driver’s door open
If the above conditions are satisfied, Read more Light Reminder Buzzer System / Light Auto Turn-Off System
Wiper switch turned INT operation
(1)Tr ON operation
When the wiper switch is moved to the INT position, Tr1 goes on for an instant, causing the relay point to switch from A side to the B side.
When the relay point switches to the B Read more Wiper switch turned INT operation
Washer motor Construction
(1)Front washer motor / rear washer motor
Fill the washer tank in the engine room with washer fluid.
The washer tank is made from translucent resin and the washer fluid is injected by operating the washer Read more Washer motor Construction
Wiper motor Construction
Ferrite magnet type motors, which use permanent magnets, are used for the wiper motors. The wiper motor consists of the motor itself and the gears, which reduce the speed output by the motor.
The ferrite Read more Wiper motor Construction