The armed state activates just when the doors are closed and locked.
When the system moves from the armed state to the alarm state, the alarm sounds immediately.
Condition A
(1)When all the doors, engine Read more Automotive Theft Deterrent System Active mode
Automotive Theft Deterrent System
To deter theft from the vehicle, this system is designed to give an alarm if any of the doors or hood is forcibly unlocked or the battery terminal is disconnected and then reconnected while all the doors Read more Automotive Theft Deterrent System
Engine immobiliser Operation Principle
1.Operation principle of engine immobiliser set (transponder key ECU control type)
When the ignition key is pulled out of the ignition key cylinder, the key unlock warning switch is turned off. The transponder Read more Engine immobiliser Operation Principle
Engine immobiliser system Components
The transponder key ECU control type engine immobiliser system consists of the following components.
1.Ignition key (Transponder chip is built in)
The coil in the transponder chip built in the key reacts Read more Engine immobiliser system Components
Engine immobilizer system
The engine immobiliser system is a theft deterrent system for vehicles. This system prohibits the engine from starting by igniting the engine and injecting fuel when any keys other than the ignition key Read more Engine immobilizer system
Dispose of SRS Airbag and Seat Belt Pretensioner
When Scrapping Vehicle
M-type airbag/seat belt pretensioners:
Remove the steering wheel pad (with airbag) and front seat outer belts (with seat belt pretensioners) from the vehicle. Unlock the sensor Read more Dispose of SRS Airbag and Seat Belt Pretensioner
Precaution for Airbag/Seat Belt Pretensioner Deployment
When scrapping vehicles equipped with SRS airbags and seat belt pretensioners or disposing of a steering wheel pad (with airbag), front passenger airbag assembly, front seat back assembly (with side airbag Read more Precaution for Airbag/Seat Belt Pretensioner Deployment
M-Type SRS AIRBAG Center airbag sensor assembly
Never reuse the center airbag sensor assembly involved in a collision where any SRS has deployed.
The connector to the sensor should be connected to or disconnected from the center airbag sensor assembly Read more M-Type SRS AIRBAG Center airbag sensor assembly
Precaution for Airbag and Seat Belt Pretensioner Handling
Failure to carry out the service operations in the correct sequence could cause the supplemental restraint system to deploy unexpectedly during servicing.
This may lead to a serious accident. Furthermore, Read more Precaution for Airbag and Seat Belt Pretensioner Handling
M-Type SRS AIRBAG Gas generator
The gas generator comprises an initiator and propellant grain housed in a metallic container. When the airbag sensor comes on, current will be applied to the initiator and ignites it.
Immediately thereafter, Read more M-Type SRS AIRBAG Gas generator