Friday, December 23rd, 2011
1.Control panel
There are many selectors on the control panel for the car A/C. These selectors are categorized as follows; air inlet selector, temperature selector, airflow selector, and blower speed selector.
The ...
Posted in Heater and Aircondition System | No Comments »
Saturday, November 12th, 2011
1.Preset function
By storing the received broadcast into the preset button, the user can select the broadcast that he wants only by pressing the preset button.
2.Auto station seeking function (SEEK)
By pressing ...
Posted in Audio System | No Comments »
Sunday, October 23rd, 2011
1.General
This system maintains the vehicle at the speed the driver has set, as long as there are no vehicles in front in the same lane. If the system detects a ...
Posted in Cruise Control System | No Comments »
Saturday, October 22nd, 2011
1.General
Whether signals from the speed sensor and those from the order switches are sent to the cruise control ECU normally can be conformed to the following by reading the blinking ...
Posted in Cruise Control System | No Comments »
Saturday, September 10th, 2011
The diagnosis circuit constantly checks malfunction of the airbag system in the two stages shown below.
Ignition switch turned to ON position → 1. Primary check (for about six seconds) → ...
Posted in SRS Airbag System | No Comments »
Thursday, June 2nd, 2011
The key-off power window function controls the power window main relay operation based on the door lock control system.
When the ignition switch is turned from the ON position to the ...
Posted in Power Window System | No Comments »
Wednesday, June 1st, 2011
Window jam is detected by two components: the limit switch and the speed sensor in the power window motor.
The speed sensor changes the motor speed to a pulse signal. Jam ...
Posted in Power Window System | No Comments »
Tuesday, May 31st, 2011
Manual Open/Close Function
When the ignition switch is in the ON position and the driver's power window switch is pulled halfway, a manual UP signal is input to the IC and ...
Posted in Power Window System | No Comments »
Saturday, April 16th, 2011
The door lock control system that is controlled by the integration relay consists of the following parts:
1.Integration relay (door lock ECU)
The integration relay receives signals from each switch and transmits ...
Posted in Door lock system | No Comments »
